Advanced Configuration (Expert Users Only)
2–23
PlugLAN 8350 Wireless SmarTAP Installation and User’s Guide
Figure 2-25: SNMP Configuration Page
Table 2-8: SNMP Configuration Page
Field
Description
SNMP Get Community
Enter the correct Get Community.
SNMP Set Community
Enter the correct Set Community.
SNMP Admin Community
Enter the name of the admin community.
Trap 1 IP Address
Enter the IP address of the trap 1 destination
device.
Trap 1 Community String
Enter the community string for trap 1.
Trap 2 IP Address
Enter the IP address of the trap 2 destination
device.
Trap 2 Community String
Enter the community string for trap 2.
Trap 3 IP Address
Enter the IP address of the trap 3 destination
device.
Trap 3 Community String
Enter the community string for trap 3.
Apply Button
After you enter your configuration settings,
click this button to apply the settings.