ASM Polytouch HUDRASYNTH Deluxe Owner'S Manual Download Page 95

Page: 95 / 115

• Give the patch a name up to 16 characters

long. This is described in the next section.

• Select one of the preset patch categories

with Control knob 3.

• Decide what will happen with the current

Macro settings when the patch is saved

(descriptions below).

• Choose one of 32 colors for the LEDs under

the wheels and the Patch knob.

Name the Patch

The naming of a patch happens in edit field

2. The current character is highlighted. Turn

Control knob 2 to select a character. Use

[SHIFT] + Control knob 2 to select the first

character of the next character group: blank,

0-9, A-Z, a-z, and other characters (!, #, +, -, etc.).
Press Control button 2 to advance to the next

character field. Use [SHIFT] + Control button 2

to select the previous character field.

Select a Category

Turn Control knob 3 to select one of the preset

patch categories.

Macro Options

Control knob 4 lets you decide what will

happen with the current settings of the Macro

knobs and buttons when the patch is saved.

Return

This option returns all Macro knobs to zero

and sets the Macro buttons to Off.

Save

This option preserves the positions of all

Macro knobs and the status of all Macro

buttons (On or Off).

Convert

This option converts the positions of all Macro

knobs and buttons into new values for the

parameters they control.
Here’s what else happens with the Macro

Convert option:

• After the patch is saved, the depth of

all Macro knobs returns to zero and all

buttons are set to Off.

• If the current relative value of a parameter

exceeds that parameter’s range, the value

will be limited to the lowest or highest

possible value depending on its current

state. The Left display will show a warning

when this is true.

• External CV and MIDI parameters under

Macro control will be returned to their zero

values.

Choose a Color

As an added degree of personal touch, you

can choose from 32 different colors for each

patch when saving. The selection affects the

LEDs under the Patch knob, the Pitch wheel,

and the Mod wheel. The selected wheel colors

will vary within that color as the wheels are

used.

Patch Backup

Whenever you get to the point where you’d

hate to lose something you’ve created on the

Hydrasynth Deluxe, be it a patch or a list of

Favorites, that’s the time to back them up to

your computer.
Our free Hydrasynth Manager application is

the best way to do this: It will send or receive a

single patch, several patches, a full bank, or the

entire memory quickly and easily. You’ll find

Hydrasynth Manager at

https://www.ashunsoundmachines.com/

downloads

Summary of Contents for Polytouch HUDRASYNTH Deluxe




















































































































Search results

Summary of Contents for Polytouch HUDRASYNTH Deluxe

Reviews:

Related manuals for Polytouch HUDRASYNTH Deluxe

Brands by name

Popular brands

ASM Polytouch HUDRASYNTH Deluxe, Owner'S Manual

Search results

Summary of Contents for Polytouch HUDRASYNTH Deluxe

Reviews:

Related manuals for Polytouch HUDRASYNTH Deluxe

Brands by name

Popular brands