ASM Polytouch HUDRASYNTH Deluxe Owner'S Manual Download Page 83

Page: 83 / 115

Save the Patch: Macro Options

The [SAVE] button has its own chapter, but we want point out this part of it now. While saving

the patch, Control knob 4 lets you specify whether the current positions of the Macro knobs

will be returned to zero (Return), stored in their current positions (Save), or converted into new

values for the parameters they control (Convert). For more information see

Patch Management

(p. 92)

Macro Button Response

There’s a separate chapter for

The System Setup Pages (p. 96)

, but this information affects how

the Macro buttons behave on the Home page and while auditioning a Macro during editing.
To access the Macro Button settings, press [SYSTEM SETUP] and press the Page Down arrow

once to reach page 2. Use Control knob 4 to select one of the four options: Toggle, Trigger,

Switch, and Reset.

• Toggle: The Macro button toggles

between the Button Value setting and the

current Control knob value.

• Trigger: The Macro button triggers the

Button Value On when pressed and Off

when released.

• Switch: Only one Macro button can be

selected at a time.

• Reset: The Macro button resets the cor-

responding Macro Knob to zero

Using a Macro button on the Home page while holding [SHIFT] changes the behavior.

When MacroBtn setting is... [SHIFT] + Macro button response is...
Toggle

Trigger the Button Value On when pressed and Off when

released.

Trigger

Hold the Button Value setting until released manually

Switch

Allow more than one Macro Button to be selected

Reset

(no response)

Summary of Contents for Polytouch HUDRASYNTH Deluxe




















































































































Search results

Summary of Contents for Polytouch HUDRASYNTH Deluxe

Reviews:

Related manuals for Polytouch HUDRASYNTH Deluxe

Brands by name

Popular brands

ASM Polytouch HUDRASYNTH Deluxe, Owner'S Manual

Search results

Summary of Contents for Polytouch HUDRASYNTH Deluxe

Reviews:

Related manuals for Polytouch HUDRASYNTH Deluxe

Brands by name

Popular brands