Positioning the washing machine
The washing machine can be installed as a built-in (integrated) or a free-standing unit. Place the
machine on a level surface so that the power outlet on the wall is accessible.
INFORMATION!
Before connecting the washing machine to the power mains, wait for at least 2 hours until it
reaches room temperature.
INFORMATION!
If the appliance is installed on a plinth or a similar structure, then the appliance must be fixed to
it, to avoid the risk of falling. ASKO original accessories are available for this purpose, complete
with fixing instructions.
Surface for positioning
The most suitable surface for installation is concrete. Unlike wooden floors or other floor coverings
with "soft" characteristics, concrete rarely vibrates during spinning.
*The washing machine must be installed in a vertical and stable position
*Do not place the washing machine on soft floor coverings, otherwise it will vibrate during spinning.
Built-in washing machine
The washing machine can be integrated under a worktop with a height of 900–950 mm. Leave 5 cm
of room around the entire appliance, including between the back edge of the upper cover and the
wall behind it.
12
Installation and connection
