Action
Error messages
Clear the drainage pump. See the chapter
. If
the problem persists, contact your nearest service centre.
Overfilling water 1
F10
See "Water remains in the dishwasher" under "Problem" in the
table below. If the problem persists, contact your nearest service
centre.
Water outlet fault
F11
Check that the water tap is on. Check that the outer filter on the
inlet hose is not blocked. See
Unblocking the inlet hose filter
in
the chapter
. If the problem persists, contact
your nearest service centre.
Water inlet fault 1
F12
Turn off the water tap and contact your nearest service centre.
Inlet valve leakage
F40
Turn off the water tap. Remove the plug from the wall socket and
contact your nearest service centre.
Heater fault 1
F41
Contact your nearest service centre.
Diverter fault
F45
Clean the coarse and fine filters. Check that the outer filter on the
inlet hose is not blocked. If the problem persists, contact your
nearest service centre.
Water level fault
F52
Turn off the water tap and contact your nearest service centre.
Overfilling water 2
F54
To avoid water leakage outside the dishwasher, do not remove
the plug from the wall socket until the water tap on the supply line
has been turned off!
Contact your nearest service centre.
Circulation pump fault
F56
Check that the water tap is on. Check that the outer filter on the
inlet hose is not blocked. See
Unblocking the inlet hose filter
in
the chapter
. If the problem persists, contact
your nearest service centre.
Water inlet fault 2
F67
Contact your nearest service centre.
BLDC drain pump fault
F68
Press any button to clear the error message.
35
Troubleshooting
