11
w
FW
Filter Wheel
s
Shutter
Shutter
g
Logic
Programmable logic card
u
Unknown
Unknown axis type
The next two lines contain the addresses in two forms, first the form that is used to prefix Card-
Addressed commands and second in hex format.
Finally, any special axis properties are printed (e.g. CRISP or SCAN capabilities) starting with firmware
version 2.8. The decimal equivalent of a byte (0-255) is printed with the bits of the byte representing
the following:
Bit 0:
CRISP auto-focus firmware
Bit 1:
RING BUFFER firmware
Bit 2:
SCAN firmware
Bit 3:
ARRAY firmware
Bit 4:
SPIM firmware (v2.81+)
Bit 5:
SINGLEAXIS and/or MULTIAXIS firmware (v2.81+)
Bit 6:
LED illumination (v2.87+)
Bit 7:
Reserved
Tiger Banner
A banner is printed by the controller on Startup and by the
WHO
command. It tells the user (and also to
any scripts and programs) all the available cards in the system, with their axis characters, axis types etc.
At 30: Comm v1.5 TIGER_COMM May 07 2013:15:42:05
At 31: X:XYMotor,Y:XYMotor v2.4 STD_XY Jun 11 2013:17:00:12
At 32: Z:Piezo v2.4 ADEPT_PIEZO Jun 11 2013:17:05:00
It is a multiline reply, each line is terminated by a
<Carriage Return>
and final line by a
<Carriage Return>
+
<Line Feed>
to designate end of Transmission.
Summary of Contents for Tiger TG-1000
Page 12: ...11 Change log 53...
