ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. Be sure to check all packing material carefully
for small parts that may have come loose inside the carton during shipment.
TOOLS REQUIRED (NOT PROVIDED):
PHILLIPS SCREWDRIVER
NO.
DESC
Q'TY
A
HEADBOARD
1 PC
B
FOOTBOARD
1 PC
C
BED HIGH RAILS
2 PCS
D
CROSS BAR
1 PC
E
BED SLATS
4 PCS
F
HEADBOARD POST
（
L + R
）
2 PCS
G
LONG SUPPORT LEG
4 PCS
H
CONNECT PANEL
2 PCS
I
SHORT SUPPORT LEG
2PCS
NO.
DESCRIPTION
SKETCH
SIZE
Q'TY
a
Allen Key
4 x 74 x 29mm
1 PC
b
Bolt
∮
1/4"x 15 x 45mm
12 PCS
c
Spring Washer
∮
1/4"x
∮
11x 2mm T
16 PCS
d
Flat Washer
∮
1/4"x
∮
18 x 2mm T
16 PCS
e
Bolt
∮
1/4"x 15 x 38mm
4 PCS
g
STRAIGHT ALLEN KEY
4*100mm
1 PC
NO.
DESCRIPTION
SKETCH
SIZE
Q'TY
a
Allen Key
4 x 74 x 29mm
1 PC
c
Spring Washer
∮
1/4"x
∮
11x 2mm T
2 PCS
d
Flat Washer
∮
1/4"x
∮
18 x 2mm T
2 PCS
e
Bolt
∮
1/4"x 15 x 38mm
2 PCS
f
Screw
#8 x 30mm
10 PCS
g
STRAIGHT ALLEN KEY
4*100mm
1 PC
STEP 1: ATTACH CONNECT PANEL (H) TO HEADBOARD POST (F) AND HEADBOARD (A) BY USING ALLEN KEY (a), BOLT (b), SPRING WASHER (c) AND FLAT WASHER (d).
STEP 2: ATTACH CROSS BAR (D) TO THE HEADBOARD POST (F) BY USING ALLEN KEY (a), BOLT (e), SPRING WASHER (c) AND FLAT WASHER (d).
STEP 3: ATTACHED SHORT SUPPORT LEG (I) TO THE FOOTBOARD (B) BY USING ALLEN KEY (a), BOLT (e), SPRING WASHER (c) AND FLAT WASHER (d).
STEP 4: HANG SIDE RAILS (C) TO THE HEADBOARD POST (F) AND FOOTBOARD (B).
STEP 5: ATTACH SUPPORT LEG (G) TO SLATS (E) BY TURNING CLOCKWISE.
STEP 6: ATTACH SLATS (E) TO SIDE RAILS (C) BY USING SCREW (f).
IMPORTANT NOTE:
1. HARDWARE BAG FOR HEADBOARD IS PACKED WITH HEADBOARD.
2. HARDWARE BAG FOR FOOTBOARD AND SLATS IS PACKED WITH FOOTBOARD.
Made In Vietnam
Page 1 of 1
EXCLUSIVE AMERICAN SIGNATURE DESIGN-DO NOT REPRODUCE WITHOUT WRITTEN PERMISSION
HARDWARE LIST FOR FOOTBOARD AND SLATS
HARDWARE LIST FOR HEADBOARD
ITEM NO.: 2650-21H/21USF/27R
QUEEN BED W/STORAGE FOOTBOARD & HIGH RAILS
PARTS LIST
SKETCH
