ashtech Reliance FS/2, Operation Manual

Page: 52 / 186

36 Reliance with FS/2 Field Operations Manual
4. Use the up/down arrows to highlight the feature you want to log: Generic
Point.
5. Press F4 (LOG) to the log point. The Attribute screen appears.
6. Enter a point offset if needed. This can be done manually or with the LRF.
7. Enter or select the requested attribute information using the key pad, and
press F4 (OK).
8. FAMlog logs position data for the specified point recording interval, and
beeps when complete.
Repeating a Point Feature
If you plan to log several points that have identical characteristics, use the repeat
function to speed data collection. Points, lines, and areas can be repeated.
1. Remain on the Logging Screen after the point feature has been logged (do
not press DONE).
2. Move to the next point.
3. Press F1 (REPT). Point logging immediately begins using the same feature
and its attributes.
Logging Multiple Points
Multiple features can be logged from the single location. Between BEGM (begin
measurement) and ENDM (end measurement), the antenna must remain stationary.
1. Start FAMlog, and call the GIS Main Menu, Figure 3.12.
2. Press F2 (FEAT). The Feature Logging screen appears, Figure 3.13.