ashtech HDS800, Reference Manual

Page: 543 / 678

527
Query Command Library
Relevant Set
Command
$PASHS,PPS
PRT: Baud Rate Settings
Function
This command is used to query the baud rate setting for any
of the serial ports used in the receiver.
Command Format
Syntax
$PASHQ,PRT[,c1][*cc]
Parameters
Response Format
Syntax
$PASHR,PRT,c1,d2*cc
Parameters
Example
$PASHQ,PRT,A
$PASHR,PRT,A,6*55
Parameter Description Range
c1 Port ID A, B, C, D, F
*cc Optional checksum *00-*FF
Parameter Description Range
c1
ID of port for which baud rate
setting is returned.
A, B, C, D, F
d2 Baud rate code 0-15 (see table below)
*cc Checksum *00-*FF
Code Baud Rate
Code
Baud Rate
0 300 7 38400
1 600 8 57600
2 1200 9 115200
3 2400 10 230400
4 4800 11 460800
5 9600 12 921600
6 19200 13 1428571