ashtech HDS800, Reference Manual

Page: 354 / 678

338
Set Command Library
Parameters
None.
Example
Turning on the internal modem:
$PASHS,MDM,ON*1C
Relevant Query
Command
$PASHQ,MDM
See also
$PASHS,MDM,OFF
MDM,PAR: Setting the Modem Parameters
Function
This command is used to set the modem parameters.
Command Format
Syntax
$PASHS,MDM,PAR[,PWR,s1][,PIN,s2][,APN,s3][,LGN,s4]
[,PWD,s5][,IPT,d6][,ADL,c7][,RNO,d8][,NET,d9][*cc]
Parameters
Parameter Description Range Default
PWR,s1
Power mode:
• AUT: Automatic
• MAN: Manual
AUT,
MAN
MAN
PIN,s2 PIN code 4-8 digits Empty
APN,s3 Access Point Name (GPRS)
32 char.
max.
Empty
LGN,s4 Login (GPRS)
32 char.
max.
Empty
PWD,s5 Password (GPRS)
32 char.
max.
Empty
IPT,d6
Internet Protocol:
• 0: TCP
• 1: UDP
0-1 0
ADL,c7
Auto-dial mode. When this parameter is set
to Yes (Y), a connection to the mount point
or IP server to which the receiver was last
connected will be initiated automatically
when the receiver is next turned on.
Y, N Y
RNO,d8 Maximum number of re-dials 0-15 2