ashtech HDS800, Reference Manual

Page: 334 / 678

318
Set Command Library
Comments
With the notification level (d1) set to 1 or 2, the receiver will
automatically send emails whenever the receiver is started up
or an external power shutdown is detected. The distinction
between d1=1 and d1=2 is the following:
• With d1=1, only high-level alarms will trigger an email.
• With d1=2,both high- and medium-level alarms will
trigger an email.
Example
Setting email parameters:
$PASHS,EML,PAR,LVL,1,SMT,smtp.gmail.com,
PRT,25,USR,gmail,PWD,gmail,SND,no-reply@proflex800.com,
ADD,johnsmith@ashtech.com*2C
Relevant Query
Command
$PASHQ,EML
See Also
$PASHS,EML,TST
EML,TST: Testing Email
Function
This command is used to test the receiver’s email function by
directly sending an email to the preset recipient. The content
of the message is “Test message for email verification”.
Command Format
Syntax
$PASHS,EML,TST[*cc]
Parameters
None.
Example
Sending email for test purposes:
$PASHS,EML,TST*4E
Relevant Query
Command
$PASHQ,EML
*cc Optional checksum *00-*FF
Parameter Description Range Default