ashtech HDS800, Reference Manual

Page: 306 / 678

290
Set Command Library
Parameters
Example
Enabling the compulsory VRS mode:
$PASHS,CPD,VRS,1*44
Comment
Users working in VRS using the CMR or RT2 format should
activate the compulsory VRS mode (d=1).
Relevant Query
Command
$PASHQ,CPD,VRS
CST,MTP,ADD: Adding/Modifying Mount Points
Function
This command is used to add or modify a mount point in the
embedded NTRIP caster. All the information you enter with
this command is made available to users through the source
table.
Warning! Make sure the command does not exceed 349
characters in length before sending it to the receiver.
Command Format
Syntax
$PASHS,CST,MTP,ADD,s1[,s2,s3,s4,s5,f6,f7,s8][*cc]
Parameters
Parameter Description Range Default
d
VRS assumption mode:
• 0: Automatic detection
• 1: Compulsory VRS mode
• 2: Never switches to VRS mode
0, 1, 2 0
*cc Optional checksum *00-*FF
Parameter Description Range Default
s1
Mount point name. An abbreviated
name is recommended (no space
character allowed). The identifier field
(s3) may be used to enter a more
detailed definition of the mount point
name.
100 characters
max.
-
s2 Mount point identifier
100 characters
max.
-