ashtech HDS800, Reference Manual

Page: 299 / 678

283
Set Command Library
Query Command
$PASHQ,CPD,ARR,OFS
See Also
$PASHS,CPD,ARR,LEN
$PASHS,CPD,ARR,MOD
$PASHS,CPD,ARR,PAR
CPD,ARR,PAR: Setting Upper Limits in Heading Mode
Function
This command is used to set the upper limits of baseline
elevation and expected maximum error in the entered
baseline length.
Command Format
Syntax
$PASHS,CPD,ARR,PAR,d1[,f2][*cc]
Parameters
Example
Setting the limits to 10° for elevation and 0.02 m for baseline
length error:
$PASHS,CPD,ARR,PAR,10,0.02*3D
Relevant Query
Command
$PASHQ,CPD,ARR,PAR
See Also
$PASHS,CPD,ARR,LEN
$PASHS,CPD,ARR,MOD
$PASHS,CPD,ARR,OFS
Parameter Description Range Default
d1
Maximum value of expected baseline
elevation (absolute value), in degrees.
Parameter d1 only affects the heading
operating mode and is not applied during
baseline length auto-calibration.
0° to 90° 15
f2
Maximum value of tolerated baseline
length error, in meters. 0.001 to
10.000
0.01
*cc Optional checksum *00-*FF -