ashtech HDS800, Reference Manual

Page: 288 / 678

272
Set Command Library
$PASHS,BRD,OFF*42
Comments
• To receive data, the $PASHS,NTR,.. and $PASHS,DIP
commands should be used.
• If the data needs to be sent to an external UHF
transmitter, the $PASHS,RDP command should be used
to configure the transmitter.
• The d2 parameter is taken into account only if the
Automatic mode is selected for the choice of differential
data inputs (see $PASHS,CPD,REM).
Relevant Query
Command
$PASHQ,BRD
See also
$PASHS,NTR,..
$PASHS,DIP
$PASHS,RDP,TYP
$PASHS,RDP,PAR
$PASHS,CPD,REM
BTH,NAME: Bluetooth Device Name
Function
This command is used to name the Bluetooth device.
Command Format
Syntax
$PASHS,BTH,NAME,s1[*cc]
Parameters
Example
Naming the Bluetooth device as “My Surveying Unit”:
$PASHS,BTH,NAME,My Surveying Unit*60
Relevant Query
Command
$PASHQ,BTH
See also
$PASHS,BTH,PIN
Parameter Description Range
s1 Bluetooth device name 64 characters max.
*cc Optional checksum *00-*FF