ashtech HDS800, Reference Manual

Page: 181 / 678

165
Web Server Help Files Collection
Configuration Tab
Tiltmeter
The Tiltmeter page is used to set the conditions in which the
receiver will communicate with and get information from the
tiltmeter.
For each serial port (A, B, F), the following parameters can be
set to allow a connection to the tiltmeter:
Parameter Designation $PASHS
Process tiltmeter
Enable this option to allow the
receiver to query the tiltmeter, if con-
nected to this port.
TLT
Baud Rate Set the port baud rate PRT
Mode
Set the port mode (RS232 or RS422).
Only port A can be RS422 or RS232.
All the others are necessarily RS232.
MDP
RTS/CTS
Enable or disable the handshaking
protocol on this port.
CTS
Initialization string
Define the string used by the receiver
to initialize the tiltmeter, if connected
to this port.
TLT
Trigger string
Define the string used by the receiver
to query the tiltmeter, if connected to
this port.
TLT
Interval
Set the time interval, in seconds, used
by the receiver to query the tiltmeter, if
connected to this port.
TLT