ashtech HDS800, Reference Manual

Page: 180 / 678

164
Web Server Help Files Collection
Configuration Tab
For each serial port (A, B, F), the following parameters can be
set to allow a connection to the meteorological unit:
Data format:
Parameter Designation $PASHS
Process meteorological
unit
Enable this option to allow the
receiver to query the meteorological
unit, if connected to this port.
MET
Baud Rate Set the port baud rate PRT
Mode
Set the port mode (RS232 or RS422).
Only port A can be RS422 or RS232.
All the others are necessarily RS232.
MDP
RTS/CTS
Enable or disable the handshaking
protocol on this port.
CTS
Initialization string
Define the string used by the receiver
to initialize the meteorological unit, if
connected to this port.
MET
Trigger string
Define the string used by the receiver
to query the meteorological unit, if
connected to this port.
MET
Interval
Set the time interval, in seconds, used
by the receiver to query the meteoro-
logical unit, if connected to this port.
MET
Parameter Designation $PASHS
“Legacy D-File
Support” check
box Meteo data are part of the data saved in G-files.
If you check this option, they will also be saved
as separate D files (Ashtech legacy format).
RFT