ashtech HDS800, Reference Manual

Page: 178 / 678

162
Web Server Help Files Collection
Configuration Tab
Ethernet:
Port I Settings:
Parameter Designation $PASHS
MAC Address
A read-only parameter providing the hardware
identification of the Ethernet port.
-
DHCP
Enable this option to let the local network
allocate a dynamic IP address to the receiver. If
disabled, a static IP address needs to be
allotted to the receiver.
ETH,PAR
IP Address
(If DHCP option cleared) Static IP address
assigned to the receiver.
ETH,PAR
Subnetwork Mask
(If DHCP option cleared) Subnetwork mask
associated to the static IP address.
ETH,PAR
Gateway
(If DHCP option cleared) Gateway associated
to the static IP address.
ETH,PAR
DNS 1 IP Address
Enter the first IP address of the DNS providing
the correspondence between the receiver
server name and its IP address.
ETH,PAR
DNS 2 IP Address
Enter the second IP address of the DNS
providing the correspondence between the
receiver server name and its IP address.
ETH,PAR
Parameter Designation $PASHS
Mode
Choose the type of protection required to
control receiver access from the Internet
through its Ethernet port I. Choose one of the
options below:
• Disabled: No communication with the
receiver is possible.
• Enabled: Communication is allowed with-
out restriction.
• Secured: Communication with the receiver
is enabled only after a login and password
have been provided (the receiver can
however output data through the Ethernet
port even if no login and password have
not been provided yet).
TCP,PAR
Protocol
A read-only field showing the currently
selected IP protocol (TCP or UDP) on port I.
$PASHQ,DST
Port
Enter the IP port number (100-65535)
through which a connection with the receiver
is possible (default: 8888).
TCP,PAR
Login
Enter the login (32 characters max.) required
of users in the case of a secured connection.
TCP,PAR