ashtech HDS800, Reference Manual

Page: 176 / 678

160
Web Server Help Files Collection
Configuration Tab
appear in the External radio pane for you to set additional
radio-related parameters.
Following the selection of a radio type, new fields appear just
above the
Type
field showing the current settings of the
receiver serial port to which the external radio is supposed to
be connected. Check/modify these settings.
Then set the radio parameters:
Parameter Designation $PASHS
Type
Select the model of the external radio connected to
the base:
• No radio
• U-Link TRx
• Magellan UHF: Radio transmitter P/N 800986
• PDL HPB/LPB
• ARF7474B EU: License-free radio for use in
Europe
• ARF7474A NA: License-free radio for use in
North America
• ADL Vantage
RDP,TYP
Parameter Designation $PASHS
Serial Port
Specify the receiver serial port to which the exter-
nal radio is connected. This field is set to A and
grayed for U-Link and Magellan UHF.
RDP,PAR
Baud Rate
(Pacific Crest only) Choose the baud rate to be
used on this port to communicate with the external
radio.
RDP,PAR
Mode
Specify the type of this serial port (RS232 or
RS422), if relevant (only port A may be RS422).
MDP
RTS/CTS
(For license-free radios only) Enable or disable the
handshaking protocol on this port.
CTS
Parameter Designation $PASHS
Load radio
settings but-
ton
(All radios except ARF7474A NA) First click on this
button to load the current settings of the chosen
radio type (“Loading..” is displayed in the Channel
field while these settings are being loaded).
As a result, the Channel, Protocol and Airlink
Speed fields are refreshed to view the current radio
settings.
$PASHQ,
RDP,PAR
Channel
(All radios except ARP7474A NA) Choose one of
the available channels for this radio.
RDP,PAR