158
Web Server Help Files Collection
Configuration Tab
Internal Modem - GPRS Mode Settings
Use this area to set the internal modem when used in GPRS
mode (General Packet Radio Service mode).
Radio Connections
This page is used to define the properties of the internal or
external radio used by the receiver. The following groups of
parameters need to be defined:
•
Internal Radio.
•
External Radio, if the receiver is a base, or is being
changed into a base.
These groups of parameters are detailed below.
Internal Radio
Use this area to set the internal radio.
Parameter
Designation
$PASHS
Internet Protocol
Select one of the following Internet protocols
to be used by the modem in GPRS mode:
• TCP
• UDP
MDM,PAR
Access Point
Enter the URL of the mobile communication
provider.
MDM,PAR
Access Point Login
Enter the login of the mobile communication
provider.
MDM,PAR
Password
Enter the password of the mobile communi-
cation provider.
MDM,PAR
Parameter
Designation
$PASHS
Power On/Off
Enable this option to turn on the internal radio
receiver right after you have clicked on the Config-
ure button.
RDP,ON
or OFF
Summary of Contents for HDS800
