ashtech HDS800, Reference Manual

Page: 120 / 678

104
Web Server Help Files Collection
Status Tab
Devices:
Memory:
Recording:
Charging Status
Indicates whether the internal battery is cur-
rently being charged or not.
PWR
Parameter Designation $PASHQ
Extended Ports
Indicates the current status of the extended
ports B and F (on or off)
ECP
Internal Modem
Gives the current status of the internal modem
(Off, On, Ready, Dialing, Online or None)
MDM
Modem Network Displays network type (2G/3G) and name MDM,STS
Internal Radio
Type
Indicates the type of internal radio used. RDP,TYP
Internal Radio Sta-
tus Indicates whether the internal radio is currently
on or off.
RDP,PAR
External Radio
Type
Indicates the type of external radio used. RDP,TYP
Ethernet Status
Gives the current status of the Ethernet port
(On or Off).
ETH
Ethernet DHCP
Status Indicates whether the DHCP mode is used
(Enabled) or not (Disabled).
ETH
Ethernet TCP Sta-
tus Indicates the type of TCP/IP connection used
(“Disabled”, “Secured” or “Enabled”).
TCP
Bluetooth Device
Name Gives the name of the built-in Bluetooth
device.
BTH
Parameter Designation $PASHQ
Internal Memory
Percentage of used/free space in the internal
memory and number of files stored in that
memory.
FLS
USB Device
With a USB device connected to the receiver,
percentage of used/free space on that key and
number of files stored on that device.
FLS
Parameter Designation $PASHQ
Storage Location
Indicates the medium where data are recorded
(Internal Memory or USB key).
FIL,LST
Recording Mode
Describes how the receiver is set up at power
up regarding raw data recording and if it is cur-
rently recording data or not.
REC
Recording Interval
Indicates the current rate, in seconds, of data
recording.
DRI
Parameter Designation $PASHQ