ashtech HDS800, Reference Manual

Page: 117 / 678

101
Web Server Help Files Collection
Status Tab
For each visible satellite of each constellation received (GPS,
GLONASS, GALILEO and SBAS):
SBAS
Indicates whether the receiver has the SBAS
reception capability (On) or not (Off).
SBA
Recording and
Output Elevation
Mask
Gives the current value of elevation angle used
in the data recording and output process.
ELM
Position Elevation
Mask Gives the current value of elevation angle used
in the position computation process.
PEM
Parameter Designation $PASHQ
ID Satellite ID number. SAT
Status
Gives status information for each satellite:
• Used: Satellite received and used
• Tracked: Satellite received but not used
• Blank: Satellite in view
• No ephemeris: Satellite does not provide
ephemeris data
• Unhealthy: Satellite declared unhealthy
• Bad URA: Bad user range accuracy.
SAT
Azimuth Azimuth angle, in degrees, of the satellite. SAT
Elevation Elevation angle, in degrees, of the satellite. SAT
SNR (dB.Hz)
Signal-noise ratios, in dB.Hz:
- For L1C, L1P(Y), L2CS, LP2(Y) and L5 sig-
nals (GPS)
- For L1C and L2C signals (GLONASS)
- For E1 and E5a signals (GALILEO)
- For L1C signal (SBAS)
SAT
Smooth Count (s)
Smooth counts, in seconds:
- For L1C, L1P(Y), L2CS, LP2(Y) and L5 sig-
nals (GPS)
- For L1C and L2C signals (GLONASS)
- For E1 and E5a signals (GALILEO)
- For L1C signal (SBAS).
Smooth count refers to that period of time dur-
ing which the signal phase is tracked
smoothly without disruption (no cycle slip).
Parameter Designation $PASHQ