ashtech HDS800, Reference Manual

Page: 112 / 678

96
Web Server Help Files Collection
Status Tab
Antenna
Recording and Output
Elevation Mask Angle value in degrees (0-90). Rele-
vant to raw data recording and output.
ELM
Heading
Heading mode currently used (inter-
nal, external or off)
CPD
With Heading Mode acti-
vated (internal or exter-
nal):
Heading Port
Displayed only if the external heading
mode has been activated. Port used
to route data from the external GNSS
receiver to your receiver.
CPD
Azimuth Offset Azimuth offset in degrees CPD
Elevation Offset Elevation offset in degrees CPD
Maximum Baseline Eleva-
tion
In degrees CPD
Maximum Baseline
Length Error
In meters CPD
Parameter Designation $PASHQ
Receiver Antenna 1
Name of the GNSS antenna connected to
the coaxial connector marked with a satellite
icon (located on the receiver rear panel); a
case-sensitive parameter (31 characters
max.)
ANP,OWN
Receiver Antenna 2
Name of the GNSS antenna connected to
the coaxial connector marked with sat
clock icons (located on the receiver rear
panel); a case-sensitive parameter (31 char-
acters max.)
ANP,OW2
Reference Position
Refers to the antenna reduction mode. Indi-
cates the physical location for which the
receiver computes a position. This can be
the antenna phase center, the ARP
(Antenna Reference Point) or the ground
mark.
ANR
Antenna Height Height above the ground, in meters. ANH
Measurement Type
“Vertical” or “Slant”.
“Vertical” is the general case, “Slant” is used
when the GNSS antenna is mounted on a
tripod.
ANH
Antenna Radius
Horizontal distance, in meters, from the geo-
metrical center to the edge of the antenna
used.
ANT
Parameter Designation $PASHQ