Specifying the right power amp is often easier than
finding it. Our SRA Series makes it a snap to get exactly
what you need.
SRAs are advanced, efficient amplifiers perfect for
installations with modest power requirements. Housed
in a compact single rack space chassis, and weighing
only 10lbs, they're designed to drive 4 or 8 Ohm loads.
Choose from 4 models available in 2 and 4-channel
configurations with power ratings of 75W and 150W
per channel into 4 Ohms. The 150W models are
capable of driving 25V constant voltage lines directly.
Switch mode power supplies and Class-D amplifier
circuitry provide an extremely power efficient solution.
They are convection cooled, so little maintenance is
needed after the installation, and no annoying fan
noise. Of course you get the reliability, superior sonic
quality and rugged construction you’ve come to
expect from Ashly.
SRA Features:
• Convection cooling
• Extremely low noise
• Extensive protection circuitry
• Level attenuators for each channel
• Signal present and clip alert status LEDs
• Selectable input sensitivity
• Defeatable 80Hz HPF
• Euroblock inputs/outputs
• Stereo or bridged mode switch per channel pair
• Remote stand-by control
• Adjustable turn-on delay up to 8 seconds
• Stereo headphone jack (on 2-channel models)
• Safety/Compliance:
c
TUV
us
, CE, FCC, RoHS
Specifications Notes: 0dBu = 0.775 VRMS
Frequency Response
(8 Ohms)
20Hz–20kHz, ±1.0dB
Distortion (SMPTE, typical) < 0.5% - 8 Ohm load, 10dB below
rated power
Distortion (THD-N, typical) < 0.5% - 8 Ohm load, 10dB below
rated power, 20Hz–20kHz
Damping Factor
(8 Ohm load, < 1 kHz)
> 200 into 8 Ohms
Input Impedance
20k Ohms, Balanced
Input Sensitivity
1dBu (75W), 4dBu (150W)
Gain
26dBu, 36dBu, Selectable
Maximum Input Level
+21dBu
HPF
80Hz 2
nd
Order, defeatable
Cooling
Convection
Output Circuitry
Class D
Amplifier/Load Protection
Output Overcurent, DC Output,
Main Supply Rail Overvoltage,
Chassis Temperature, Inrush
Limiting, Mains Fuse
Environmental
40-120° F, (4-49° C) noncon-
densing
Front Panel
Controls
AC Power Switch, Level
Indicators (LED color)
Power (Blue), Standby (Yellow),
Protect (Red), Signal (Green),
Clip (Red)
Rear Panel
Controls
80Hz HPF, Gain/Sensitivity: +26dB,
+36dB, Bridge/Stereo Switch,
Remote Standby, Delay
Connectors (each channel) Input: 3-Pin Euroblock
Output: Euroblock
Cordset
3-Prong IEC
SRA SERIES
S
tandard
P
ower
a
mPlifierS
SRA Models
2075 4075 2150 4150
Channels
2
4
2
4
Max Output Power: Per Channel, 20Hz–20KHz, 1% THD All Channels Driven
4 Ohms
75W
75W
150W
150W
8 Ohms
40W
40W
80W
80W
8 Ohms (Bridged)
150W
150W
300W
300W
Line Current Draw: All Channels Driven @ 4 Ohms
Standby Mode
37mA
39mA
89mA 102mA
No Signal
320mA 565mA 370mA 660mA
Typical (1/8 power pink noise)
0.70A
1.25A
1.10A
1.95A
Max (1/3 power pink noise)
1.23A
2.25A
2.10A
3.80A
Thermal Dissipation: BTU/hr, All Channels Driven @ 4 Ohms
Standby Mode
13
15
14
23
No Signal
61
113
72
137
Typical (1/8 power pink noise)
73
145
111
211
Max (1/3 power pink noise)
85
150
126
263
Signal to Noise
20Hz–20kHz, unweighted
>100dB >100dB >103dB >103dB
©2014 All features, specifications and graphical represen-
tations are subject to change without notice. Ashly Audio
is a division of Jam Industries, Ltd. DS-1 1213
Sra
2075
Sra
2150
Sra
4075
Sra
4150
5-Year Warranty
Hand-built in
Webster, NY
Weights, Dimensions & Power
Dimensions
19”W x 1.75"H x 11”D (483mm x 45.5mm x 279.4mm)
Unit Weight
2075: 8.75lbs (3.97kg) 2150: 8.83lbs (4kg)
4075: 9.4lbs (4.27kg) 4150: 9.48lbs (4.3kg)
Shipping Weight 2075/2150: 15lbs (7kg) 4075/4150: 16lbs (8kg)
Power Req.
120VAC, 240VAC ±10%, 50/60Hz (factory set)
Ashly Audio, Inc.
|
847 Holt Road
Webster, New York 14580-9103 USA
+1-800-828-6308 US toll free
+1-585-872-0010 tel
|
+1-585-872-0739 fax
|
www.ashly.com
