Page 9 of 43
P015-913
INSTALL ATION
1.
Check that the control knob for the gas supply
system is turned to the
“OFF” position before
starting any assembly. lace all four glass pieces(A
and F)in between the four slots in the glass
buckles(C),and tighten screws(in hardware bag) to
fasten glass. Be sure not to over-tighten.
2.Unscrew the washer(G) and nut(I) from the
body(D). Then place the body(D) onto the table
top (not include)through the umbrella hole on the
table top.
3.
Screw the washer(G) and nut(I) onto the
body(D) and tighten.
