background image

2

© 2021 United States Stove Company

IMPORTANT INFORMATION

CODES

Adhere  to  all  local  codes  or,  in  their  absence,  the 

latest edition of NFPA54.

PLEASE  READ  THE  INSTALLATION  &  OPERATING 

INSTRUCTIONS BEFORE USING APPLIANCE.

IMPORTANT:

READ ALL INSTRUCTIONS AND WARNINGS 

CAREFULLY BEFORE STARTING INSTALLATION. 

FAILURE TO FOLLOW THESE INSTRUCTIONS 

MAY RESULT IN A POSSIBLE FIRE HAZARD 

AND WILL VOID THE WARRANTY.

WARNING:

•  ANY CHANGE TO THIS HEATER OR ITS 

CONTROLS CAN BE DANGEROUS.

•  IMPROPER INSTALLATION OR USE OF THE 

HEATER CAN CAUSE SERIOUS INJURY OR 

DEATH FROM FIRE, BURNS, EXPLOSION OR 

CARBON MONOXIDE POISONING.

•  DO NOT ALLOW FANS TO BLOW DIRECTLY 

INTO THE STOVE. AVOID ANY DRAFTS THAT 

ALTER BURNER FLAME PATTERNS.

•  DO NOT USE A BLOWER INSERT, HEAT 

EXCHANGER INSERT OR OTHER ACCESSORY, 

NOT APPROVED FOR USE WITH THIS 

HEATER WHERE APPLICABLE.

 WARNING: FIRE,EXPLOSION, AND 

ASPHYXIATION HAZARD

•  IMPROPER ADJUSTMENT, ALTERATION, 

SERVICE, MAINTENANCE, OR INSTALLATION 

OF THIS HEATER OR ITS CONTROLS CAN 

CAUSE DEATH OR SERIOUS INJURY.

•  READ AND FOLLOW INSTRUCTIONS AND 

PRECAUTIONS IN USER’S INFORMATION 

MANUAL PROVIDED WITH THIS HEATER.

•  DO NOT ALLOW FANS TO BLOW DIRECTLY 

INTO THE STOVE. AVOID ANY DRAFTS THAT 

ALTER BURNER FLAME PATTERNS.

•  DO NOT USE A BLOWER INSERT, HEAT 

EXCHANGER INSERT OR OTHER ACCESSORY, 

NOT APPROVED FOR USE WITH THIS 

HEATER WHERE APPLICABLE.

IMPORTANT:

READ THIS OWNER’S MANUAL CAREFULLY 

AND COMPLETELY BEFORE TRYING TO 

ASSEMBLE, OPERATE, OR SERVICE THIS 

APPLIANCE. IMPROPER USE OF THESE LOGS 

CAN CAUSE SERIOUS INJURY OR DEATH 

FROM BURNS, FIRE, EXPLOSION AND CARBON 

MONOXIDE POISONING.

IMPORTANT:

VENT-FREE HEATERS ADD MOISTURE TO 

THE AIR. ALTHOUGH THIS IS BENEFICIAL, 

INSTALLING THIS HEATER INTO ROOMS 

WITHOUT ADEQUATE VENTILATION MAY 

CAUSE MILDEW TO FORM FROM TOO MUCH 

MOISTURE.

For Customer Service, please call:
1-800-750-2723 Ext 5050 or;
Text to 423-301-5624 or;
Email us at:
[email protected]

Note:

 Register your product online at 

www.usstove.com

 or download the 

free app today. This app is available only 

on the App Store for iPhone and iPad. 
Search US Stove. Save your receipt with 

your records for any claims.

Summary of Contents for AGC500VF

























Reviews: