ASHA Beam Profile PMB-201, Manual, Page: 13 / 20

13 WWW.ASHA-CO.IR
Setup
Safety
It should be noted that all safety tips in this manual are only use -
ful when used in accordance with the conditions and for use un -
der the mentioned situations. All parts should be connected to
each other with a suitable and shielded cable. If you need to re -
place some parts of Asha’s company with others, you need to in-
form ASHA’s Technical support. If any changes in the compo -
nents of the product are applied, it may lose its functionality.
Due to the body reflection and optical filter, it is recommend -
ed that you turn off the light source or set it in low pow -
er mode when using in the desired location. It is also nec -
essary to have an orthogonal beam on the sensor surface.
This instrumentational device only will be calibrated when placed in
the foam and special box according to the original packaging. It is rec -
ommended that you take alternative packaging from ASHA company
if necessary.