Drill through the four holes in the base of the unit using 6mm dia masonry
drill to a depth of 70mm. Screw in the anchor fixings. (These have a self
cutting thread). If not anchoring the unit, fit the self seal plugs BEFORE
BUILDING to seal the fixing holes from underneath.
TOOLS REQUIRED
Power driver POSI-DRIV screwdriver, 6mm dia. masonry drill, a 13mm
socket spanner and all weather sealent suitable for steel and concete.
SECURE STORE
BASE INSTRUCTIONS
Flat and firm base. Recommended: concrete, tarmac or paving flags.
Min. distance from walls/ shrubbery: 1000mm.
Min. base size (WxDxH) 1600mm x 1000mm x 50mm.
LEVELING THE UNIT
Correctly level the constructed unit using the shims (ZCOMPPLAS)
provided prior to fixing the unit to the ground. Slide the packing pieces
under the corners of the unit base as required until an equal gap has
been achieved around the door allowing for its smooth operation and
alignment.
For maintenance instructions of this product visit www.asgardsss.co.uk
Warning: panels weigh over 20Kg
Beware of manual handling
6mm
Dia.
13mm
Spanner
18V
x2
SEALANT
ZSCREW32
x4
ZSCREW100
x67
ZSCREW340
x18
ZCOMPPLZS02
x4
ZCOMPPLAS22-23-24
x6
2x 2mm, 2x 3mm, 2x 5mm
TOP
PANEL
41916
x1
LH SIDE 38003
x1
RH SIDE 38004
x1
RH DOOR 41917
x1
LH DOOR 38020
x1
BASE P
ANEL
37903
x1
LH BACK P
ANEL
36971
x1
RH BACK P
ANEL
37015
x1
COVER PLA
TE
38031
x2
Warning: Please keep
this key card safe! Refer
to if replacement key is
required.
00001
YOUR UNIQUE
KEY CODE
Posi-Driv
Screwdriver
