It is always recommended to anchor the unit to the ground. Drill through
the four holes in the base of the unit using 6mm dia masonry drill to a
depth of 70mm. Screw in the anchor fixings. (These have a self cutting
thread). If not anchoring the unit, fit the self seal plugs BEFORE
BUILDING to seal the fixing holes from underneath. Please note
product must be bolted down to comply with LPS1175.
TOOLS REQUIRED
Power driver POSI-DRIV screwdriver, 6mm dia. masonry drill and a
10mm socket or spanner.
CENTURION PLUS 2
BASE INSTRUCTIONS
Flat and firm base. Recommended: concrete, tarmac or paving flags.
Min. distance from walls/ shrubbery: 1000mm.
Min. base size (WxDxH) 4940mm x 1730mm x 50mm.
LEVELING THE UNIT
Correctly level the constructed unit using the shims (ZCOMPPLAS)
provided prior to fixing the unit to the ground. Slide the packing pieces
under the corners of the unit base as required until an equal gap has
been achieved around the door allowing for its smooth operation and
alignment.
Warning: some panels may weigh over
20Kg. Beware of manual handling
10mm
Spanner
18V
For maintenance instructions of this product visit www.asgardsss.co.uk
x2
SEALANT
LH R. SIDE P
ANEL
32874
x1
LH EXT
. SIDE PNL
32853
x2
F. BASE PNL
32940
x1
R. BASE PNL
32871
x1
EXT
BASE PNL
32850
x2
LH DOOR 32943
x1
RH DOOR 32944
x1
FRONT
FASCIA
32948
x1
ZSCREW32
x16
ZSILCO1
x3
ZSCREW04
x4
ZSCREW100
x368
ZSCREW340
x24
32670
x24
ZCOMPPLZS02
x16
ZCOMPPLAS22-23-24
x24
8x 2mm, 8x 3mm, 8x 5mm
BASE COVER CHANNEL
37364
x3
SIDE COVER CHANNEL
32916
x6
ROOF COVER CHANNEL
32918
x6
RH F
. SIDE PNL
32942
x1
RH EXT
. SIDE PNL
32854
x2
LH BACK P
ANEL
32867
x1
RH BACK P
ANEL
32876
x1
TOP
SHROUD
32945
x2
EXT
. TOP
SHROUD
32996
x2
RH R. SIDE PNL
32875
x1
F. T
OP
PANEL
32986
x1
R. T
OP
PANEL
32987
x1
EXT
. TOP
PANEL
32927
x2
LH F
. SIDE P
ANEL
32941
x1
Warning: Please keep
this key card safe! Refer
to if replacement key is
required.
00001
YOUR UNIQUE
KEY CODE
ROOF JOINT
STRIP
40446
x6
6mm
Dia.
Posi-Driv
Screwdriver
