It is always recommended to anchor the unit in to the ground. Drill
through the four holes in the base of the unit using 6mm dia masonry drill
to a depth of 70mm. Screw in the anchor fixings. (These have a self
cutting thread). If not anchoring the unit, fit the self-seal plugs
BEFORE BUILDING to block the fixing holes 4 from underneath and
4 from sides of base.
TOOLS REQUIRED
Power driver POSI-DRIV screwdriver, 6mm dia. masonry drill and a
10mm socket or spanner.
ADDITION
ZSCREW32
x4
ZSCREW100
x128
ZSCREW340
x18
32670
x12
6mm
Dia.
Posi-Driv
Screwdriver
10mm
Spanner
18V
ZCOMPPLZS02
x8
ZCOMPPLAS22-23-24
x6
2x 2mm, 2x 3mm, 2x 5mm
RH DOOR 36935
x1
LH DOOR 33867
x1
FR
T PNL
TRAP
PLA
TE 36934
x1
LARGE FR
T P
ANEL
36560
x1
LH SIDE P
ANEL
36555
x1
RH SIDE P
ANEL
36556
x1
RH BACK P
ANEL
36558
x1
LH BACK P
ANEL
36557
x1
TOP
PANEL
32604
x1
BASE P
ANEL
36443
x1
FASCIA
36561
x1
RAIN GUARD 32615
x1
BASE INSTRUCTIONS
Flat and firm base. Recommended: concrete, tarmac or paving flags.
Min. distance from walls/ shrubbery: 1000mm.
Min. base size (WxDxH) 1990mm x 1100mm x 50mm.
LEVELING THE UNIT
Correctly level the constructed unit using the shims (ZCOMPPLAS)
provided prior to fixing the unit to the ground. Slide the packing pieces
under the corners of the unit base as required until an equal gap has
been achieved around the door allowing for its smooth operation and
alignment.
For maintenance instructions of this product visit www.asgardsss.co.uk
Warning: some panels may weigh over
20Kg. Beware of manual handling
Warning: Please keep
this key card safe! Refer
to if replacement key is
required.
x2
00001
YOUR UNIQUE
KEY CODE
