It is always recommended to anchor the unit in to the ground. Drill
through the four holes in the base of the unit using 6mm dia masonry drill
to a depth of 70mm. Screw in the anchor fixings. (These have a self
cutting thread). If not anchoring the unit, fit the self seal plugs BEFORE
BUILDING to block the fixing holes from underneath.
TOOLS REQUIRED
Power driver POSI-DRIV screwdriver, 6mm dia. masonry drill and a
10mm socket or spanner.
ACCESS
ZSCREW32
x4
ZSCREW381
x12
ZSCREW100
x60
ZSCREW340
x12
41843
x1 /
41844
x1
ZHWMISC89
x2
ZHWHANDLE32
x1
ZSCREW42
x4
45767
x4
41824
x2
41459
x4
6mm
Dia.
Posi-Driv
Screwdriver
10mm
Spanner
18V
ZCOMPPLZS02
x8
ZCOMPPLAS22-23-24
x12
4x 2mm, 4x 3mm, 4x 5mm
BASE P
ANEL
40966
x1
LH BACK P
ANEL
41341
x1
RH BACK P
ANEL
41342
x1
RH SIDE P
ANEL
41331
x1
LH SIDE P
ANEL
41329
x1
LH FRONT
P
ANEL
41452
x1
RH FRONT
P
ANEL
41453
x1
RH DOOR S/A
41350
x1
LH DOOR S/A
41348
x1
LID S/A
40961
x1
BASE INSTRUCTIONS
Flat and firm base. Recommended: concrete, tarmac or paving flags.
Min. distance from walls/ shrubbery: 1000mm.
Min. base size (WxDxH) 2200mm x 1150mm x 50mm.
LEVELING THE UNIT
Correctly level the constructed unit using the shims (ZCOMPPLAS)
provided prior to fixing the unit to the ground. Slide the packing pieces
under the corners of the unit base as required until an equal gap has
been achieved around the door allowing for its smooth operation and
alignment.
For maintenance instructions of this product visit www.asgardsss.co.uk
x2
Warning: some panels may weigh over
20Kg. Beware of manual handling
ZHWNUT41
x12
ZSCREW43
x10
2x 70mm disc padlocks
required. Not supplied.
Keys alike recommended.
All manuals and user guides at all-guides.com
