Asentria SiteBoss 530, User Manual

Page: 24 / 140

Asentria SiteBoss 530 User Manual
18
Notification Timeout
sets the number of seconds (3 to 60) between two attempts to send an SNMP notification in the
same cycle. Default setting is 60.
Notification Cycles
sets the maximum number of cycles (0 to 60) to try per notification action, where one notification
action corresponds to one "inform" keyword in an action list for an event. A cycle is a set of notification attempts
delimited by a successful action delivery or snooze period. Default setting is 10.
Notification Snooze Period
sets the time in minutes (1 to 1440) between two SNMP notification cycles for any one
notification action. That is, if you have two events generate informs, each inform will have its own timeouts for retries
and cycles, and its own snooze period. Default setting is 60.
Notification Security Name / Password
sets the name and password used for authentication when sending
SNMPv3 traps. (Not supported in the S530)
Note: SNMP traps are
not
a guaranteed means of delivering notifications. Traps are a one-way IP network
datagram and the device receiving traps does not acknowledge them. Therefore, if the trap does not reach its
intended destination for whatever reason, the sending device has no way of recognizing this and resending the trap.
FTP Settings
SiteBoss 530 - FTP Settings
A) FTP Push Enable [OFF]
B) FTP Server Address []
C) Username [Default FTP Username]
D) Password [********]
E) Account []
F) Directory []
G) Minutes Between Push Attempts [1440]
H) Select Files to Push
I) Remote File Names
FTP Push Enable
toggles between OFF and REGULAR. Default setting is OFF.
FTP Server Address
is the IP address or host name of the FTP server to push to. (Max length 64 chars)
Username / Password
defines the login credentials that are able to access the remote FTP server. (Max length
Username is 126 chars) (Max length Password is 31 chars)
Account
is a third login option used only on some FTP servers. Consult your network administrator to see if this
is necessary. (Max length 126 chars)
Directory
is the path used to transfer the file(s). The file(s) is transferred to the root login directory if this option is
left blank. (Max length 253 chars)
Minutes Between Push Attempts
sets the number of minutes (1 to 9999) between FTP push attempts. Default
setting is 1440 minutes.
Select Files to Push
displays the FTP File Selection menu where you can select which files are pushed by
toggling ON or OFF. Default setting for all is ON, except for Audit Log, which is OFF.
SiteBoss 530 - FTP File Selection
A) Data File 1 [ON]
B) Data File 2 [ON]
C) Events File [ON]
D) Audit Log [OFF]
Remote File Names
displays the FTP File Names menu where you can give each file a name other than the
default name, and/or prepend a date, time, and unique sequence # to the file name.