ASEM HMI30, User Manual

Page: 57 / 91

51
HMI30 / HMI30-TF User’s guide
Figure 64
Debug the project
In case the project is not protected, just click on the “OK” button, otherwise in-
sert the name and password of a project user that has the rights to change the
project.
You will see that a debug session will start in Premium HMI on the configuration
PC. Now you are able to:

See the project screens and navigate between them. Please note that
you can see different screen from those seen on HMI30 and that your
debugging is not affecting the normal running of HMI30 project

See and change the value of the variables

Put breakpoint and debug Visual Basic scripts running in the project
5.4.4 Trasfer the project from HMI30 to the configuration
PC
This option allows you to transfer the project from HMI30 to the configuration
PC in order to check or change and hence transfer again into HMI30.
Hint : It is always suggested to protect the project with a password in order to
don’t allow changes to the project by not authorized users.
Be sure that the project is not running on HMI30, run Premium HMI on the con-
figuration PC, click on the “File” menu and select “Open Device Project…”
1. Select TCP in the upper left list
2. Write the IP address of HMI30
3. Write the path on which you want to store the project on your configu-
ration PC
4. Click on the button “Get Project from Device!”