ASEM HMI30, User Manual

Page: 10 / 91

4
SECTION 1 – Preliminary Informations
1.5 Qualified Personnel
a) HMI30 may be operated only by personnel qualified for the specific task
in accordance with the relevant documentation for the specific task, in
particular its warning notices and safety instructions.
b) Qualified personnel are those who, based on their training and experi-
ence, are able to identify risks and avoid potential hazards when working
with these systems.
1.6 Basic knowledge required
a) To understand operating instructions a general knowledge of automa-
tion technology is needed.
b) Knowledge of personal computers and the Microsoft operating system is
required to understand this user’s guide.
1.7 Proper use of the product
a) ASEM products may only be used for the applications described in the
catalogue and in the technical documentation.
b) If products and components from other manufacturers are used, these
must be approved by Asem.
c) Proper transport, assembly, installation, storage, commissioning, opera-
tion and maintenance are required to ensure that the product operates
safely.
d) The indicated environmental conditions must be observed.
e) The information in this user’s manual must be observed.
1.8 Purpose of the user’s guide
a) This user’s manual contains information based on the requirements de-
fined by DIN EN 62079 for mechanical engineering documentation.
b) These operating instructions are intended for:
1. Users.
2. Commissioning engineers.
3. Maintenance personnel.
c) Pay attention at the information in the chapter "Safety instructions".
d) More information such as operating instructions, examples and refer-
ence information, are available in the online help of Premium HMI 3
software and Ubiquity software.
1.9 The manual is a part of the system
a) This user’s guide belongs to HMI30 and is also required for commission-
ing.
b) Keep all supplied documentation for the entire service life of HMI30.
1.10 Figures
a) This manual contains illustrations of the described devices.
b) Some details of the illustrations may differ from the device provided.