ASEM BM1 Series, User Manual

Page: 46 / 118

40 SECTION 4 – System Start-U
p
Suppress PTT Commands Bypass TPM2 commands submitting to PTT FW. [Enable] [Disable]
TDO GPIO Pin Switch
TDO GPIO Pin If Auto is selected, TDO will be disabled for A0 silicon only. For other steppings, TDO
will be enabled.
[Enable] [Disable]
SMRR Disable / Enable SMRR [Enable] [Disable]
Max Memory 2G Set maximum memory size to 2GB [Enable] [Disable]
Persistent RAM size Specify the amount of Main memory to be reserved for Pram. The memory will be al-
located right after MRC initialization and its location will be stored into ACPI table.
[Enable] [Disable]
OS DNX
OS DnX focus entry Enable / Disable OS Dnx [Enable] [Disable]
ISH GPI0 (I2C0) Pull Up Enable / Disable ISH GPI0 (I2C0) Pull Up [Enable] [Disable]
ISH GPI0 (I2C1) Pull Up Enable / Disable ISH GPI0 (I2C1) Pull Up [Enable] [Disable]
Processor Trace Configuration
Processor trace memory allocation Disable or Select Processor trace memory region Size: from 4KB " 128MB. [Enable] [Disable]
CSE Data Clear Option
CSE Data Clear Data Clear is for reset/clearing of the CSE data region. -
Option to clear Data region during IFWI Update
Capsule Data Clear To Enable/Disable call to DataClear during Capsule Update. [Enable] [Disable]
Table 32 - Debug Configuration
4.3.6.22 ACPI Settings
System ACPI parameters
Native PCIE Enable Bit - PCIe Natiue * control
0 - ~ Hot Plug
1 - SHPC Native Hot Plug control
2 - ~ Power Management Events
3 - PCIe Advanced Error Reporting control
4 - PCIe Capability Structure control
5 - Latency Tolerance Reporting control
[Disable] [Enable]
Intel Ready Mode Technology Enable/Disable Ready Mode support based on Windows Away-mode. Only on DT/AIO. [Enable] [Disable]
Low Power S0 Idle Capability This variable determines if we enable ACPI Lower Power SO Idle Capability (Mutually
exclusive with Smart connect). Also updates the Platform S0ix Capability Support in
IGD OpRegion.
[Enable] [Disable]
PEP Constraints Configuration Control which controllers get included in PEP constraint list
Table 33 - ACPI Settings
4.3.6.23 PEP Settings
PEP Constraints Configuration
PEP CPU Add CPU in PEP mitigation list [Enable] [Disable]
PEP Graphics Add Gfx in PEP mitigation list [Enable] [Disable]
PEP SATA Add Storage device in PEP mitigation list [Enable] [Disable]
PEP UART Add UART in PEP mitigation list [Enable] [Disable]
PEP SDIO Add SDIO in PEP mitigation list [Enable] [Disable]
PEP I2C0 Add I2C0 in PEP mitigation list [Enable] [Disable]
PEP I2C1 Add I2C1 in PEP mitigation list [Enable] [Disable]
PEP I2C2 Add I2C2 in PEP mitigation list [Enable] [Disable]
PEP I2C3 Add I2C3 in PEP mitigation list [Enable] [Disable]
PEP I2C4 Add I2C4 in PEP mitigation list [Enable] [Disable]
PEP I2C5 Add I2C5 in PEP mitigation list [Enable] [Disable]
PEP I2C6 Add I2C6 in PEP mitigation list [Enable] [Disable]
PEP I2C7 Add I2C7 in PEP mitigation list [Enable] [Disable]
PEP PUHI Add PUHI in PEP mitigation list [Enable] [Disable]
PEP HSUART1 Add HSUART1 in PEP mitigation list [Enable] [Disable]
PEP HSUART2 Add HSUART2 in PEP mitigation list [Enable] [Disable]
PEP HSUART3 Add HSUART3 in PEP mitigation list [Enable] [Disable]
PEP HSUART4 Add HSUART4 in PEP mitigation list [Enable] [Disable]
PEP SPI1 Add SPI1 in PEP mitigation list [Enable] [Disable]
PEP SPI2 Add SPI2 in PEP mitigation list [Enable] [Disable]
PEP SPI3 Add SPI3 in PEP mitigation list [Enable] [Disable]
PEP XHCI Add XHCI in PEP mitigation list [Enable] [Disable]
PEP Audio Add Audio in PEP mitigation list [Enable] [Disable]
PEP EHMC Add EHMC in PEP mitigation list [Enable] [Disable]
PEP SDXC Add SDXC in PEP mitigation list [Enable] [Disable]
Table 34 - PEP Settings
4.3.6.24 Memory ECC Error Logging
Memory ECC Error Logging to SMBIOS Event Log
Error Logging Enable Memory ECC Error Logging to SMBIOS Event Log. [Enable] [Disable]
Table 35 - Memory ECC Error Logging
4.3.6.25 SMBIOS Event Log
Manage SMBIOS Event Log
Event log validity Valid -
Event log capacity Space available -
Event Log Enable / Disable Event Log. [Enable] [Disable]
View SMBIOS event log View SMBIOS event log. -
Mark SMBIOS events as read Mark SMBIOS events as read. Marked SMBIOS events won't be displayed.
[Enter]
Clears SMBIOS events Clears SMBIOS events [Enter]