ASEM BM1 Series, User Manual

Page: 45 / 118

39 BM1xx User ’s guide
BootTime Log Boot Time for OS booting [Enabled] [Disabled]
EFI Network Enable / Disable EFI Network support for onboard LAN [Enabled] [Disabled]
Real Time Option
Select Read-Time Enable and IDI Agent Real-Time Traffic Mask Bits
[RT Disabled]
[RT Enabled, Agent IDI1]
[RT Enabled, Agent Disabled]
Factory Reset Request Activate Factory Reset procedure when set to [True] [False] [True]
Table 28 - Boot
4.3.6.18 Security Configuration
BIOS setting Function Configuration options
TXE Configuration
TXE FW Version - 3.1.76.2356
TXE FW Capabilities - 31109440
TXE FW Features - 31109440
TXE FW OEM Tag - 00000000
TXE Firmware Mode - Normal
TPM Configuration
TPM device
Selects TPM Device: PTT (Intel® Platform Trust Technology), Discrete TPM 1.2
or Discrete TPM 2.0
[Disable]
[PTT]
[dTPM 1.2]
[dTPM 2.0]
PTT Enabled PCR Banks
Select the PCR banks you wish to support
[SHA1]
[SHA256]
[Both]
Table 29 - Security Configuration
4.3.6.19 Thermal
BIOS setting Function Configuration options
Thermal Configuration Parameters
Automatic thermal reporting Configure _CRT, _PSU and _AC0 automatically based on values recommended in
BUG's Thermal Reporting for Thermal Management settings. Set to Disabled for man-
ual configuration.
[Enable] [Disable]
Critical Trip Point This value controls the temperature of the ACPI Critical Trip Point - the point in which
the OS will shut the system off.
[103 C]
Passive Trip Point This value controls the temperature of the ACPI Passive Trip Point - the point in
which the OS will begin throttling the processor.
[79 C]
Synamic Platform&Thermal Framework
DPTF - [Enable] [Disable]
Table 30 - Thermal
4.3.6.20 System Component
BIOS setting Function Configuration options
CRID Setting
Select the Revision ID reflected in PCI config space
[Disable]
[CRID_0]
[CRID_1]
[CRID_2]
PMIC ACPI OBJECT Enable / Disable PMIC ACPI Device [Enable] [Disable]
PNP Setting Select PNP setting mode. Disable, Performance, Power or Power & Performance
mode [Disable]
[Power & Performance]
OS Reset Select Select the reset type In FACP table [Cold Reset] [Warm Reset]
Embedded Power Instrumentation Enable / Disable EPI feature [Enable] [Disable]
USB TypeC AUTO:
Enable TypeC for RVP1C. Disable TypeC for all other RUP. Disable: Disbale TypeC.
Enable : Enable TypeC [Auto]
[Enable]
[Disable]
PS2 Keyboard and Mouse
Disable: Disable PS2 Keyb. / Mouse Enable: Enable PS2 Keyb. / Mouse AUTO: Detect
PS2 Mouse exist
[Auto]
[Enable]
[Disable]
Spread Spectrum Clocking Configuration
DDR SSC Enable DDR Spread Spectrum Clocking configuration [Enable] [Disable]
DDR SSC Selection Table Choose the item in SSC selection table for DDR spread spectrum [-0.5%]
DDR Clock Bending Selection Table Choose for clock bending [0% (No Clock Bending)]]
Highspeed Serial IO SSC Enable Highspeed Serial lO Spread Spectrum Clocking configuration [Enable] [Disable]
Highspeed Serial lO SSC Selection Table Choose the item in SSC selection table for Highspeed Serial IO spread spectrum [-0.5%]
Table 31 - System Component
4.3.6.21 Debug Configuration
Kernel Debugger Configuration
Kernel Debugger Enable Enable or disable support for a kernel debugger (e.g. WinDBG). This mode configures
the UART2 device for Legacy 16550 8-bit Addressing Mode and hides the device from
the OS.
[Enable] [Disable]
APEI BERT Configuration
APEI BERT Enable or Disable APEI BERT. [Enable] [Disable]
ACPI Memory Debug Switch
ACPI Memory Debug Enable or Disable ACPI Memory Debug. [Enable] [Disable]
TXE Debug Option
End Of Post If disabled, BIOS will not Send End of Post Message. [Enable] [Disable]
Lock Directory If disabled, BIOS will lock SETUP variable after End of Post. [Enable] [Disable]
PTT Debug Option