ASE 2000, Owner'S Manual

Page: 13 / 26

All Seasons Equipment |Owner’s Manual - 2000 Hydraulic Swing Hoist 13
Maintenance
Maintenance Chart
Each
Use
8
Hours
25
Hours
50
Hours
100
Hours
200
Hours
400
Hours
Check Hydraulic Fluid Level Initial

Change Hydraulic Fluid

Change Hydraulic Oil Filter

Check Hydraulic Lines

Check Engine Oil Level (Gasoline)

Change Engine Oil (Gasoline)

Change Engine Oil Filter (Gasoline)

Grease Frame

Service Air Cleaner (Gasoline)

Replace Air Filter (Gasoline)

Check Spark Plugs (Gasoline)

Replace Spark Plugs (Gasoline)

Check Battery Electrolyte (Gasoline)

Charge Battery (Gasoline) Initial
Replace Fuel Filters (Gasoline)

Inspect Hoist Pulleys

Inspect Hoist Cable

Check Engine Rotation

Check the Hydraulic Fuel Level
The hydraulic tank is located at the end of the Power Pack. Fluid levels are monitored with an level gauge. This Level
Gauge is located on the side of the hydraulic tank.
Before the engine is first started, and after 25 hours of operation, check the hydraulic fluid level.
This machine is designed to use high quality 10W40 oil. In high temperature situation 20W50 oil can be used to
increase machine performance.
Hydraulic Tank Capacity is: 20 Gallons (75.7 Litres)
Before checking the fluid level, ensure that the unit is parked on a level surface with the lift arms lowered, the engine
off and the key removed.
Changing the Hydraulic Oil
Change the Hydraulic Oil after 400 operating hours.
1. The Unit should be parked on a level surface, unloaded, with the engine off and the key removed.