ASD Document 600540 Rev. J
31
FieldSpec® 3 User Manual
www.asdi.com
Chapter 4 Fiberoptic Interface
Step 3
On the instrument controller, exit any ASD applications that might be running
and communicating with the unit. Such applications include RS
3
and Indico.
Step 4
Ensure that the spectrometer is turned on.
Step 5
Start the
Fiber Check
application from the
Start
menu under
All Programs->ASD Programs->RS3 Tools->Fiber Check
.
Step 6
Ensure the IP address configured is the one for your spectrometer.
Figure 4-1
Magnifier for testing the Fiberoptic cable.
Figure 4-2
Fiber Check
Program
Summary of Contents for FieldSpec 3
