ASD Document 600540 Rev. J
6
FieldSpec® 3 User Manual
www.asdi.com
Chapter 1 Introduction
1.2
Computer Requirements
The
instrument controller
is a computer that manages the FieldSpec
spectroradiometer, stores data, and processes the results.
The standard FieldSpec spectroradiometer includes a laptop computer, or the
instrument controller.
The minimum requirements for the instrument controller are:
•
1.2 GHz Pentium or better notebook or PC-w/monitor
•
256 MB RAM or more
•
20 GB of free disk space
•
1024 x 768 or better graphics resolution
•
24-bit color or better - 32-bit recommended
•
Ethernet port: 10/100 Base T Ethernet interface
•
(Optional) Ethernet wireless (WiFi) adaptor: PCMIA, USB, or built-in
that is compatible with the 802.11b standard
•
(Optional) Serial communications port (or USB port) for GPS receiver
(only needed if you want to use GPS)
•
(Optional) NMEA compatible GPS receiver
1.3
Software Requirement
The instrument controller requires the following software:
•
RS
3
Software from ASD
•
Microsoft Windows® 95/98/NT/2000/ME/XP Operating System
•
Microsoft Internet Explorer 6.0 or better
Users need a basic understanding of the Microsoft Windows operating system
including software installation.
International customers using non-English versions of Windows must alter
the
Regional Settings
under
Start->Settings->Control Panel
. The
default language must be set to English (United States) in order for the
software to be registered and operate correctly. The numbering format must
also be set to English.
Summary of Contents for FieldSpec 3
