Ascotel® IntelliGate® 2025/2045/2065 as of I7.9
Operation and Maintenance
185
sy
d-
020
4/1.
7
– I7.
9
– 1
2
.2009
6. 1. 2. 2
Deleting terminal configuration data
To delete the system configuration data from a system terminal, delete the termi-
nal's user number from the numbering plan in the system configuration (Configu-
ration Manager) using the Delete key. All the data is then reset to its initialization
values.
The terminal configuration data of a single system terminal can be reset to the first-
start values in the Configuration Manager under 3_2_2 with the "
Reset terminal
data
" button.
6. 2
Update Software
6. 2. 1
System software
The PBX's system software is loaded using the AIMS Upload Manager or the addi-
tional application "Smart Software Update".
The PBX's system software also contains the software for the Office 45 system ter-
minals, the DECT radio units and the Office 135 and Office 160 handsets.
There are several possibilities for establishing a communication link between the
PBX and the AIMS Upload Manager (see
).
The type of access to the PBX is also determined by the type of upload. A standard
upload replaces an already functional system software (see
).
An Emergency Upload has to be initiated if the PBX does not have a functional sys-
tem software (see
"Emergency Upload of the system software", page 190
).
Tip
The PBX’s software version can be displayed as follows on system termi-
nals with a display:
1. Access the configuration menu
2. Long-click on the * key
Depending on the terminal, additional information is displayed.
6. 2. 1. 1
AIMS Upload Manager
The Upload Manager called up via the AIMS Shell is a convenient and reliable way
of loading a new system software on to the PBX.
