Ascotel® IntelliGate® 2025/2045/2065 as of I7.9
Configuration
175
sy
d-
020
4/1.
7
– I7.
9
– 1
2
.2009
If data has been changed, but not yet stored in the PBX by saving, the system dis-
plays a prompt asking whether the configuration should be saved.
The system will then ask you whether you want to update the local AIMS database.
Save
The modified data is stored in the PBX and the check marks alongside the modified
parameters are cleared. Saving always stores the data from all the AIMS Managers
in the PBX.
Download
During a download via the AIMS Shell the PBX data are loaded from the PBX to the
AIMS database.
During the download the PBX is automatically prebarred and then automatically
released once the operation is completed. Existing connections are retained. The
progress of the download operation is indicated by a progress indicator bar in a
window. A download can be carried out when the system is operating under full-
load conditions.
Download view
The View Download function loads the PBX data of the current window in an AIMS
Manager from the PBX into the PC's main memory. This partial download is availa-
ble in the online mode of individual Managers (e.g. Configuration Manager, Fault &
Maintenance Manager).
"View Download "
is used to register new or modified hard-
ware in AIMS.
Upload
During an upload via the AIMS Shell the PBX data are written from the AIMS data-
base into the PBX.
During a data upload the PBX is automatically prebarred and then again released
once the operation is completed. The progress of the upload operation is indicated
by a progress indicator bar in a window.
The status of CFUs, user group members, switch groups and relays can also be up-
loaded.
An upload is carried out in the following cases:
•
Putting a new system into operation.
