Ascotel® IntelliGate® 2025/2045/2065 as of I7.9
172
Configuration
sy
d-
020
4/1.
7
– I7.
9
– 1
2
.2009
Remote access via an external dial-up connection to the AIN is also
secured. A LAN connection for configuring the AIN can only be set up if
the HEX rotary switch on the Master is on Pos. 7. This is irrespective of
whether dial-up access is via a satellite or directly to the Master.
5. 4. 3
Function keys for remote access authorization
On system terminals (with the exception of Office 10) the */# procedure for ena-
bling remote access authorization can be stored under a function key, providing
the user has the appropriate authorization.
The relevant LED lights up if remote access is enabled once or permanently.
The relevant LED goes off as soon as remote access is denied again, either automat-
ically or manually, using the procedure or the configuration menu or the AIMS Con-
figuration Manager.
Tab. 96
Menu example of a one-off remote access on the Office 45
Tab. 97
Menu example of repeated remote access on the Office 45
The menus for Office 35 are similarly structured except that the submenu for "
Once
Only
" or "
On
" is located on a separate page.
5. 5
Exchanging data between PBX and PC
The system and user data is stored in the PBX and on the PC's hard disk. Both data-
bases are serviced by the AIMS Managers. To keep the databases at the same level,
you need to exchange data between the databases.
The figure below illustrates the interplay between the PC and the two databases:
F12:
REMOTE MAINT.
ONCE ONLY
OK
BACK
? v
F12:
REMOTE MAINT.
ON
OK
BACK
? v
