Ascon tecnologic AC3nP, Installation Manual

Page: 8 / 38

AC
3
nP - Installation Manual
2
The following table shows the installation options.
1-1-2 Order code
AC³nP system configuration Installation type
PO04 + nP4
All installation types possible, the Front Panel
mounting uses the “Short installation plate”
PO04 + nP4 + 1 eP4 expansion module
All installation types possible, the Front Panel
mounting uses the “Long installation plate”
PO04 + nP4 + 2 eP4 expansion modules
Only the Remote installation type is possible
with this configuration
CPU Module
AC3nP
= Module nP4
Analogue I/O Configuration
-
= None
4 = 4 Universal 8 DI + 2 DI CNT + 8 DO
Analogue Outputs
-
= None
2 = 1 module with 2 not isolated analogue outputs
4 = 2 modules with 2 not isolated analogue outputs each
First expansion module
--
= None
M1 = Modbus 4 UI + 8 DI + 8DO + 2 DI CNT
+ 4 relays OP
M2 = Modbus 4 UI + 2 AO+ 8 DI + 8DO + 2 DI CNT
+ 4 relays OP
M3 = Modbus 4 UI + 4 AO + 8 DI + 8DO + 2 DI CNT
+ 4 relays OP
Serial ports
2I
= RS232/485 Is RS485 Isolated
Operator panel
-
= None
P = P04 Operator panel with Adapter
A = Adapter
ACC = Cabling and accessories
-
= None
C = Short Installation Board + 0.2 m cable
L = Long Installation Board + 0.2 m cable
0 = 0.2 m cable
1 = 1 m cable
2 = 2 m cable
5 = 5 m cable
HW/SW AC3 Customization
xxxx
= Reserved (internal use only)
SW Subversion
x
= Reserved (internal use only)
Second expansion module
--
= None
M1 = Modbus 4 UI + 8 DI + 8DO + 2 DI CNT
+ 4 relays OP
M2 = Modbus 4 UI + 2 AO+ 8 DI + 8DO + 2 DI CNT
+ 4 relays OP
M3 = Modbus 4 UI + 4 AO + 8 DI + 8DO + 2 DI CNT
+ 4 relays OP