TD 92326GB
2009-03-10 / Ver. E
Installation and Operation Manual
VoIP Gateway
125
8
Set password if set on the Gateway object. This setting is in junction with the “No
of Regs w/o Pwd.” on the PPX > General page.
Figure 113. Configure the PRI interface
9
Click “OK”.
If PRI3 is connected the procedure is repeated but PRI3 is given the name
Meridian_2.
The call number mapping for incoming calls, for example adding leading zeros, or 9 in US,
is also performed In Gateway > Interfaces. Refer to chapter
17.4.5 Add Users
1
Select PBX > Objects.
2
Select “User” in the drop-down list and click “new”.
Figure 114. Add user
3
Enter a name in the
Long Name
text field. This is the name presented in a called
party´s display.
4
Enter a name in the
Name
text field. This is the VoIP client name (the name
displayed on the handset in idle mode) the unique H.323 name used in the IP
telephone network.
5
Enter the telephone number in the
Number
text field.
6
Enter a number in the
Busy On
text field, or leave empty. Here you specify how
many calls the user can have, and switch between, before a calling party is getting
Figure 102.
