TD 92326GB
2009-03-10 / Ver. E
Installation and Operation Manual
VoIP Gateway
123
17.4 Administration Settings
17.4.1 Create a Gateway Object to handle External Calls
Calls to non-configured users are usually rejected in the PBX Application. To handle these
calls a gateway object has to be created (this is the formerly automatically created
“EXTERN” object), see
Set up a Gateway Object to handle External Extensions
page 76 for more information.
1
Select PBX > Objects.
2
Select “Gateway” in the drop-down list and click “new”.
Figure 111. Gateway object for external numbers
3
Enter a name in the Long Name text field, for example “Unknown_numbers”.
4
Enter a name in the Name text field, for example “Unknown_numbers”.
5
Click “OK”.
17.4.2 Activate the PBX Application in the VoIP Gateway
The PBX Application is used for setting up users, VoIP clients, trunk lines, call groups etc.
and the PBX Application works as a gatekeeper as well.
1
Select PBX > General.
2
Select “Master” in the
PBX mode
drop-down list.
