TD 93066EN
User Manual
Ascom Myco Smartphone
4. Basics
16
14 May 2018 / Ver. K
4.4
Use Vibrator Only, or Silent Mode
Ringtones and the Notification sound is turned off by setting the handset to either Vibrator
only, or Silent mode. In Silent mode the vibrator is also turned off.
It is possible to set what alert priority is required to initiate the vibrator during a call (priority 1-8).
This is controlled under
Settings > Ascom Settings > Sound > Vibrate for incoming messages
during call
.
There are two different ways to switch to Vibrator only, or Silent mode:
• Press and hold the Volume down button. After the lowest volume level the handset first
enters Vibrator only mode, and after another press, the Silent mode.
• Decrease the volume in the Settings app, refer to
4.5
Use the Touchscreen
The main handset display has a touchscreen with full support for standard Android gestures,
such as tap, drag, swipe, and stretch and pinch.
Tap
Tap (touch) the display with a finger to:
• Open, or select an item.
• Select, or clear a check box, or an option.
• Place the cursor to input text with the keyboard.
Tap and Hold
Tap (touch) and hold the finger to the display to:
• Move an item.
• Show a menu.
• Enable selection mode, for example, to select several items from a list.
NOTE: It is also possible to select
Yes
or
No
for
Vibrate for incoming messages
during call
instead of a priority level. But break-through messages will
override the
No
parameter setting.
NOTE: Alerts and incoming messages are still shown on the top display, and by
Color-coded LED priority beacon flashes, when the handset is in Vibrator
only, and Silent mode.
NOTE: The handset can be configured to not allow settings below a certain volume,
Configuration Manual, Ascom Myco Smartphone
for details.
NOTE: Third-party apps may use additional gestures.
