ASCOM Ascotel 2025, System Manual

Page: 1014 / 1141

ascom Ascotel 2025/2045/2065
HBT_20321104_07/B0_en Data Maintenance 7.15
2.2.6 Software Upload for DECT Systems
Ascotel DECT Radio Unit
Fig. 7.5: Ascotel DECT radio unit
The Flash memory on the Ascotel DECT radio unit contains an area that cannot
be modified. It is used for starting the radio unit and receiving the software for
the radio unit.
The actual software for the radio unit is contained in the PBX's system software.
The loaded software is tested when the radio unit starts up. If the loaded software
is not identical to the version in the system software, the software will be down-
loaded from the PBX on to the Ascotel DECT radio unit and stored in the Flash
memory of the Ascotel DECT radio unit.
Office 130 / Office 130pro Handsets
The software for the Office 130 / Office 130pro handsets is updated via radio (AIR
upload). This requires the handset to be logged on to system A.
The memory on the Office 130 / Office 130pro handsets is a Flash memory. The
Flash memory contains an area that cannot be modified. This area contains the
handset's boot software.
The software for the Office 130 / Office 130pro handsets is contained in the
PBX's system software. The loaded software is tested when the handset starts up.
If the loaded software is not identical to the version in the system software, the
PBX will initiate an AIR update. The software is loaded from the PBX onto the
Office 130 / Office 130pro handsets via radio and stored in the Flash memory.
To be able to run an AIR upload, you need to ensure that the Office 130 /
Office 130pro handset contains a functional software.
Aerials
Flash memory
haz1230aaena0