AT5000 2.6GHz DMOD Optical Transmitter
Solutions Provider for FTTx, RFoG and HFC www. ascentcomtec.com
Page 10 of 27
On receiving your new AT5226-DMOD, you should carefully unpack and examine the contents
for loss or damage that may have occurred during shipping. Refer to warranty registration if
loss or damage has occurred. The AT5226-DMOD should consist of the following:
Qty
Description
1
AT5226-DMOD2 Unit
1
1
Key for switching laser ON / OFF
Test Report
1
Power supply cord
1
Optional Product User Manual ( Optional)
Keep all AT5226-DMOD packing boxes and packaging for future transport.
Use only the original AT5226-DMOD packaging when transporting. This packaging has been
specifically designed to protect the equipment.
The AT5226-DMOD requires a mains input of 90 V
AC
to 265 V
AC
at 50 to 60 Hz. The unit will
automatically adjust the power conversion for inputs within these ranges, with no switch
setting or other user intervention. Power consumption of the unit is 50 watts maximum.
The transmitter is designed to operate with an ambient temperature of 0 °C to 50 °C with
humidity up to 95 %. Free ambient air should be maintained around all sides of the unit. Care
should be taken to ensure that the air flow around the unit is unrestricted.
The AT5226-DMOD should have a minimum ventilation clearance of 1 RU above and below
the transmitter.
Warning
DO NOT expose AT5226-DMOD to conditions which would permit condensation to form
on the inside of the transmitter.
DO NOT operate AT5226-DMOD outdoors.
