1
SF021 Solar Ceramic Frog Instructions
By All Solar Central
www.allsolarcentral.com
Thank you from the entire ASC family for purchasing
an ASC solar product! Please read this entire booklet
before assembly.
Package contents:
1 x Frog
1 x Reservoir
1 x Water Pipe and Rubber Bung
1 x Water Pump
1 x Solar Panel with Bracket
1 x Extension Tube
1 x Ground Spike
Notes:
If there is any damage to the product or missing
parts, please contact us at 1-626-582-8898 or
www.allsolarcentral.com/contactus
Assembly Steps:
1.
Attach Water Pipe to the Frog Base with a
provided Rubber Bung
2.
Attach the Frog onto the Reservoir. Put the pipe
through the hole on top surface of the Reservoir.
3.
Attach the pump to the water pipe and exit
through a hole on the back side of the Reservoir.
4.
Add appropriate amount of clean water into the
Reservoir and make sure the pump is fully
submerged in the water.
5.
Connect the bracket, tubes and spike together.
Then attach the solar panel to the bracket. Slide
the holding bracket into the inside lip of the top
half of the solar panel frame. The bracket holds
the weight of the solar panel. The solar panel can
be adjusted for optimal sunlight by using the
wingnut. Please see the diagram.
6.
Insert the spike into the ground. Position the
solar panel so it’s facing south (in northern
hemisphere) as much as possible to maximize
daylight hours. It is important to angle the solar