V
er
. 20
13091
3
Storm Lighter
Art.no 31-1039
Model TF12219
Please read the entire instruction manual before using the product and save it for future reference.
We reserve the right for any errors in text or images and any necessary changes made to technical data.
If you have any questions regarding technical problems please contact Customer Services.
Safety
• Ignite the lighter away from your face and clothing.
• Contains flammable gas under pressure.
• Do not expose the lighter to temperatures above 50 ºC and avoid prolonged exposure to sunlight.
• Handle the lighter with care so as not to puncture the gas container and keep it away from naked flames when it is not in use.
• The lighter must not be modified or altered in any way.
• Never use, fill or store the lighter in areas where flammable liquids, materials or gases are stored or used.
• Ensure that the flame is extinguished after use.
• Do not keep the flame lit for more than 10 seconds.
• Do not touch the lighter to the material being lit.
• Fill only with gas lighter fuel (Butane).
• Before igniting the lighter after filling it, make sure that the lighter and your hands are free of excess fuel.
• Use caution, the flame is almost invisible in strong light and daylight.
• Never touch the burner with your fingers, it can become very hot.
• Never use the lighter if it has been damaged in any way.
• Store the lighter out of reach of children.
Operation
Note:
The lighter is supplied empty, without gas.
Refilling the lighter fuel (Butane)
• Refill the lighter outdoors or in a well-ventilated area.
• Never refill the lighter near to a naked flame or other heat source.
• Never attempt to light the flame whilst refilling.
• Hold the lighter away from your face and clothing whilst refilling.
• Keep the lighter lid closed whilst refilling.
1. Unscrew the plastic cap on the bottom of the lighter.
2. Set the flame adjustment to low (-).
3. Press the fuel canister’s nozzle onto the lighter’s refilling valve to refuel the lighter.
4. Fill in 3-second bursts, repeating until the lighter is full. Fill slowly and do not overfill.
5. Wipe any excess fuel off the exterior of the lighter and your hands when you have finished refuelling.
6. Wait 2–3 minutes for the gas inside the lighter to stabilize.
7. Ignite the flame and adjust its height.
Troubleshooting guide
The lighter will spark but not ignite.
• Out of fuel.
• Flame adjuster set too low.
A hissing sound is heard.
• Flame adjuster set too high.
• The lighter is leaking gas.
Disposal
Follow local ordinances when disposing of this product.
If you are unsure how to proceed, contact your local authority.
GREAT BRITAIN • customer service
tel: 08545 300 9799 e-mail: [email protected] internet: www.clasohlson.com/uk
ENGLISH
