DDM200 user manual - hardware
Created by: MPuchner 01.2020
version: 9600024A
Original user manual
page 50 of 66
printed: 25.02.2020
5.12.3
Telescope alignment with tilt adapter
To rotate the telescope you need to slightly loosen the red marked screws. Then unscrew one of the yellow
marked screws and tighten the second one.
To tilt the telescope you need to use the red marked pull screws and the orange marked push screws.
Figure 62 - telescope alignment
Do not forget to tighten all the screws when you reached your desired alignment!
